The INERTEX family of gasketing and sealing products are produced by proprietary processes protected by both u.s. and world. All INERTEX products share the following typical properties:

• 100% expanded virgin PTFE • Pressure range, full vacuum to 3,000psi • Low coefficient of friction (.02 like wet ice)
• Temperature range, -450°F to +600°F • Extremely soft, excellent conformability • FDA suitable (FDA 21 CRF 177.1550)
• pH range from 0 to 14 • Little creep or cold flow • No aging or hardening in service

INERTEX® RRTC RAIL ROAD TANK CAR GASKETS
INERTEX® RRTC RAILROAD TANK CAR GASKETS ARE ENGINEERED TO SOLVE PROBLEMS RELATING TO THE TRANSPORTATION OF AGGRESSIVE CHEMICALS

Click here to request a product sample

The RRTC gaskets come in two designs. The first is the type "N" design which is a gasket nozzle design that fits in most 18" and 20" nozzles. The second is the type "DL" design which is a Gasket Dome Lid Design. It stays in place inside the tank car dome groove to lessen handling and positioning problems.

Product Benefits:
• Expanded PTFE facings wrapped around a 316ss corrugated insert
• Expanded PTFE assures ease of opening dome and easy removal of gaskets
• Resists cutting; won't crack, harden, or distort like rubber gaskets
• Corrugated insert provides dynamic response to compensate for railcar vibration
  Mechanically secure to manway. Will not fall into railcar

The INERTEX®
TYPE "N" GASKET NOZZLE DESIGN

316ss tabs secure the gasket to the nozzle and prevent if from falling into the tank car. (bend down to fit nozzle.)

The INERTEX® TYPE "DL" GASKET
DOME LID DESIGN

316ss tabs secure the gasket into the cover groove to prevent the gasket from falling out.